If you clicked on a link or a button and nothing happened, there are three reasons why this may happen:

• Your company server may not allow scripts. Ask your I.T. contact if desirable pop-ups can be allowed.
• You have software on your computer that suppresses unwanted pop-up and banner advertisements. See if it has a setting to allow desirable pop-ups, or at least temporarily allow them.
• Your browser has been set to disable "scripting". Browsers may vary in exact sequence and wording. Below is how "scripting" is enabled and disabled in Internet Explorer Version 6.0. Other browsers should be very similar.

Click "Tools", then click "Internet Options"
Click the "Security" tab
Click the "Custom Level" button
Scroll almost to the bottom to the section "Scripting" with sub-section "Active Scripting". If enable is already selected, hit cancel. Your browser is already set to enable scripting. Click "OK" to exit tools.
Select "Enable"
Click the "OK" button
Click the "YES" button for "Are you sure you want to change the security setting for this zone?"
Click the last "OK" button
Now, make your browse "Refresh" or "Reload". This will load the new settings. If desired, you can use the same process to "Disable" scripting again when done.

Any further problems, please contact james@maverix.co.uk